Filtering By Groups - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Fabric Manager Client Quick Tour: Admin Perspective
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 5-9
1
2
3
The information for both fabrics is displayed; you do not need to select a seed switch. To see details of
a fabric, select the tab for that fabric at the bottom of the Fabric pane, or double-click the Cloud icon for
the fabric in the SAN tab.
Note Enclosure names should be unique. If the same enclosure name is used for each port, Fabric Manager
shows a host/target enclosure connected to both fabrics. To fix this problem, you can either disable
auto-creation or create unique enclosure names.

Filtering by Groups

You can filter the Fabric pane display by creating groups of switches or end ports. To create a group in
Fabric Manager, follow these steps:
Right-click a switch or end port in the Fabric pane map and select Group > Create.
Step 1
You see the Edit User Defined Group dialog box shown in
Cisco MDS 9000 Family Fabric Manager Configuration Guide
5-28
Fabric Manager's Multiple Fabric Display Window
The Fabric view tab for fabric 172.23.46.152. When selected, the Fabric view displays fabric
172.23.46.152.
The Fabric view tab for fabric 172.23.46.153. When selected, the Fabric view displays fabric
172.23.46.153.
SAN tab (selected), showing two fabrics.
Chapter 5 Fabric Manager Client
Figure 5-10.
OL-17256-03, Cisco MDS NX-OS Release 4.x