Configuring Other Statistics - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 7 Fabric Manager Web Client
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 7-52
Step 4 Select a fabric for which to collect performance data from the Fabric drop-down list.
Either check the VSAN Scope check box to receive notifications for all VSANs, or enter the VSAN IDs
Step 5
in the ID List field to limit the VSANs for which you want to collect performance data.
Step 6 Check the check boxes for the type(s) of entities for which you want to collect performance data.
Step 7 Check the check boxes for the type(s) of thresholds you want to enable.
Click Create to add the collection and add it to the table.
Step 8
Repeat Steps 3 through 8 to continue adding roles.
Step 9
Performance Manager shows statistics for fabrics that you have configured collections for using the
Note
Collection Wizard.
To remove a collection using Fabric Manager Web Client, follow these steps:
Step 1 Click the Admin tab, and then click Configure.
Step 2 Click Collections in the left navigation pane.
Check the check box next to the collection you want to remove and click Remove.
Step 3

Configuring Other Statistics

To configue other statistics using Fabric Manager Web Client, follow these steps:
Click the Admin tab, and then click Configure.
Step 1
Click Others in the left navigation pane.
Step 2
You see the Others page as shown in
OL-17256-03, Cisco MDS NX-OS Release 4.x
Create Collection Dialog Box
Figure
Cisco MDS 9000 Family Fabric Manager Configuration Guide
7-53.
Admin
7-57