Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 143

Chapter 5 Fabric Manager Client
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 5-4
Enter the Fabric Manager Server user name and password.
Step 7
Check the Use SNMP Proxy check box if you want Fabric Manager Client to communicate with Fabric
Step 8
Manager Server through a TCP-based proxy server.
Click Login. Once you successfully log in to Fabric Manager Server, you can set the seed switch and
Step 9
open the fabrics that you are entitled to access.
Note
You see the Discover New Fabric dialog box shown in
Figure 5-5
Note
Set the fabric seed switch to the Cisco MDS 9000 Family switch that you want Fabric Manager to use.
Step 10
Enter the user name and password for the switch.
Step 11
Choose the Auth-Privacy option according to the privacy protocol you have configured on your switch:
Step 12
If you have not configured the switch with a privacy protocol, then choose Auth-Privacy option MD5
a.
(no privacy).
If you have configured the switch with your privacy protocol, choose your Auth-Privacy choice.
b.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Fabric Manager Login Dialog Box
When you launch Fabric Manager Client for the first time or when there are no available fabrics,
you see the Discover New Fabric dialog box.
Discover New Fabric Dialog Box
Only network administrators can discover new fabrics.
Launching Fabric Manager Client in Cisco SAN-OS Release 3.2(1) and Later
Figure 5-5.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
5-5