Using Alias Names As Enclosures - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 5 Fabric Manager Client
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Using Alias Names as Enclosures

To create an enclosure that uses the alias name as the name of the enclosure using Fabric Manager, follow
these steps:
Expand End Devices and select Hosts or Storage from the Physical Attributes pane.
Step 1
You see the list of devices in the Information pane. The NxPorts tab is the default.
Right-click the enclosure names that you want to convert to alias names and select Alias > Enclosure as
Step 2
shown in
Figure 5-12
The Ailas > Enclosures window appears as shown in
can also add expressions to the list and modify expressions in the current list.
Figure 5-13
Click the Apply Changes icon to save the changes and then click Close.
Step 3
OL-17256-03, Cisco MDS NX-OS Release 4.x
Figure 5-12.
Alias Enclosure
List of Expressions
Figure 5-13. It contains a list of expressions. You
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Modifying the Device Grouping
5-33