Perfresourceshow - Brocade Communications Systems 8 Command Reference Manual

2

perfResourceShow

perfResourceShow
Displays performance monitor resources for a logical switch.
Synopsis perfresourceshow --fportRes [[slot]/port]
perfResourceShow --eeRes [[slot]/port]
perfResourceShow --fabmodeRes
perfResourceShow --installed [[slot]/port]
perfResourceShow --help
Description Use this command to determine the physical resources available to support the installation of
performance monitors on a logical switch port.
In a Virtual Fabric environment, performance monitors installed on a logical switch share the
physical resources of the switches that make up the base fabric. To make efficient usage of existing
system resources, such as link table size for all supported monitors, the resources reserved for a
given logical switch are allocated when the first monitor is installed on a port belonging to that
logical switch. The resources are de-allocated when the last monitor installed on a given partition is
removed.
This command displays the resource availability for the current logical switch context. The display
includes the maximum of supported monitors, the number of monitors currently installed, and the
remaining available resources.
In a non-Virtual Fabric environment, this command displays the resources for the switch.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following optional operands:
slot
port
--fportRes
--eeRes
--fabmodeRes
--installed
--help
586
For bladed systems only, specifies the slot number of the port for which to
display the resources, followed by a slash (/).
Specifies the number of the port for which to display the resources, relative to
its slot for bladed systems. Use switchShow for a listing of valid ports.
Displays the number of F_Port monitors that can be installed on a specified
port. If no port is specified, this command displays the resources for all ports
on the current logical switch.
Displays the number of EE monitors that can be supported on the specified
port. If no port is specified, this command displays the resources for all ports
on the current logical switch.
Displays whether fabric mode Top Talkers are running on the current logical
switch. A port is not required with this operand.
Displays the monitor types installed on a specified port.
Displays the command usage.
Fabric OS Command Reference
53-1001764-02