Promax PROWATCH Neo + Manual page 62

For more information refer
SNMP Options
►
SNMP is a communication protocol to monitor devices in a network. User has to
fill out these parameters to communicate with the equipment and to supervise
it. SNMP parameters are:
SNMP Configuration:

•Get Community (by default "public"): Community identification name for
request messages.
•Set Community (by default "private"): Community identification name for
setting messages.
SNMP version 1 / SNMP version 2

•Traps: It allows enabling or disabling alert messages.
•Manager IP: IP address for SNMP Manager.
•Community: Community identification name.
SMTP Options
►
SMTP stands for simple mail transfer protocol. User has to fill in all these
parameters in order to receive by e-mail all the notifications triggered during
monitoring (for more details refer to
SMTP parameters are:
Enabled: When checking this box e-mails sending is enabled.

Server IP Address

Server port.

From e-mail address.

Connection type (secure, unsecure).

Authentication required: Check this box if authentication is required and in

that case enter user and password.
NTP Options
►
NTP (Network Time Protocol) is a network protocol that synchronizes time from
a server on a device. It periodically connects this server and updates date and
time. This function requires an Internet connection to work. It is especially
necessary in tools where accuracy at the time of execution is important, such as
in monitoring, task management, etc.
NTP parameters are:
Chapter 3: SETTINGS AND PREFERENCES
"Streaming V/A" on page
"Signal Quality Monitoring" on page
54
169.
March 2025
214).