Promax PROWATCH Neo + Manual page 150

8 To save FSM data, go to "Tools", select "Datalogger" and then "New" to
create a new datalogger. Keep in mind that the "FSM" tool does not
demodulate any signal, it only detects the transmitted energy, so it is
identied as a GENERIC signal. For this reason only FSM data is saved for each
channel (for more details refer to
9 Once finished, return to the Tools menu and in the Field Strength
option select Off.
NOTE: Some tools (Constellation, Echoes, MER by carrier, Merogram...) are
disabled when the Field Strength option is enabled. Remember to turn
off "FSM" option if you want to use these other tools.
5.15.3 Settings
The Field Strength configuration option allows the user to enter the correction
factors for the antenna and cable used when measuring the field strength.
Chapter 5: TOOLS
Figure 93.
"Datalogger" on page
142
125).
March 2025