Promax PROWATCH Neo + Manual page 19

2.4.3 Recommended Settings for Monitoring
Now there is a list with the recommended settings for monitoring. To access
these settings press on key PREFERENCES
the keyboard for 2 seconds:
Date & Time: It is important to set date and time in the equipment in

order to save monitorings at the proper time and later be able to locate
them.
NTP: It is the time server where the equipment takes date and time

reference. It is complementary to Date & Time settings.
Tools -> Watchdog: Enabled.

Tools -> Moni. ddbb loc.: Hard drive.

SMTP -> Set the mail server to receive alarms.

Equipment -> Company / User: Company and user where alarms are sent.

For more info about settings and preferences refer to the chapter
AND PREFERENCES" on page
2.4.4 Firmware Updating
Time to time firmware updates are published. These updates add some new
functions and improve performance. We recommended you to keep your
equipment updated.
To update your equipment follow these steps:
1 Switch off the equipment.
2 Press and hold the service mode button (see number 13 on
page 4). You can use the tip of a paperclip to press this button.
3 Press the power switch and wait a few seconds for the equipment to turn on.
4 Release the service mode button.
5 To verify that you are in service mode, check the led colour is orange.
6 Insert a USB flash drive with the update
7 Then press the service mode button again for a time longer than 10 seconds
and release it.
*. Request the update file to PROMAX
March 2025
for 2 seconds o press the key F on
41.
*
file inside.
11
"SETTINGS
"Rear View." on
Chapter 2: SETTING UP