Promax PROWATCH Neo + Manual page 267

Parameter
Communication Software
IP by default
WiFi Interface
Type
External Unit Power (through the RF input connector)
Terrestrial Supply
Satellite Supply
22 kHz Signal Voltage
22 kHz Signal Frequency
DiSEqC Generator
SATCR / SCD (EN50494)
dCSS / SCD2 (EN50607)
►Internal Storage
Parameter
(PROWATCH
Neo +)
(PROWATCH
Neo 2)
►Mechanical Features
Parameter
Dimensions
Rack Units
Weight (PROWATCH
Weight (PROWATCH
March 2025
Value
webControl
Netupdate
10.8.8.188
Wireless standard 802.11 abgn
External
5 V
12 V
24 V
External
5 V
13 V
15 V
18 V
0.65 V ± 0.25 V
22 kHz ± 4 kHz
DiSEqC 2.2 (DiSEqC 1.2 commands
implemented)
Available
Available
Value
6 GB
1 TB
Value
482 x 44,4 x 381 mm
1U
2.9 kg
Neo +)
3.5 kg
Neo 2)
Additional Data
Functions: Measurement and
spectrum, TV parameters, remote
console, monitoring, historical
monitoring, installation management
and task management.
Functions: Installation management
and firmware update.
10.0.6.198 for firmware versions prior
to 26.8
Dongle-Wifi connected to USB port
Dongle must be validated by PROMAX
Up to 500 mA
Up to 500 mA
Up to 250 mA
Up to 500 mA
Up to 500 mA
Up to 500 mA
Up to 500 mA
Up to 500 mA
Selectable in Satellite band
Selectable in Satellite band
DiSEqC is a trademark of EUTELSAT
DiSEqC 1.2
Compatible with LNB SKY UK
According DiSEqC 2.x
Additional Data
Memory for measurement protocols,
screenshots, monitoring and service
recording
Hard drive For measurement
protocols, screenshots, transport
stream recordings, monitoring and
service recording
Additional Data
(W) x (H) x (D)
Without installed options
Without installed options
259 Chapter 12: SPECIFICATIONS PROWATCH Neo +/2