Promax PROWATCH Neo + Manual page 291

the screen. Press F1 to exit because it is not necessary to log in a WiFi
network to use this tool.
2 Connect the RF omni-directional antenna (supplied) to the RF input. This
antenna detects WiFi band spectrum.
3 Press "Settings" key to access Settings menu. In "Signal Source" select
"WiFi".
4
Press "Settings" key again, access "Band" option and select a band from
available WiFi bands.
5 Press the F1 "Tuning" key and on "Channel Plan" select the WIFI 5 GHz. In
case it is not avaiable, go to "Installations management"
Manage and press F3: Installation. Press "Add Channel Plan" and select the
WiFi 5GHz channel plan.
6 To start monitoring, first select tuning mode wether to tune by access point
(AP) or channel (CH) using the F1 "Tuning" menu (enabled tuning mode is
shown on joytstick icon)
7 For more details about WiFi Monitoring refer to
page 171.
i.6 LTE 2.6 GHz
Description
►
The 2.6 GHz LTE option expands the spectrum analyzer to the band 7 of LTE.
Band 7 is defined by an uplink band between 2.5 and 2.57 GHz and a downlink
band between 2.62 and 2.69 GHz.
Band 7 of LTE is one of the most used globally since it allows to transmit with
greater speed but at a shorter distance and is more exposed to suffer
interference.
Description
►
Follow the steps explained in the section
March 2025
"LTE Signals" on page
283
, press F2:
"WIFI MONITORING" on
85.
Annex i: OPTICAL OPTION