Advertisement
ii.2
Operation
1
Connect the RF input signal to the equipment.
2
Select RF source signal and terrestrial band in Settings
3
Lock the DAB/DAB+ signal.
4
To enable auto-detection for DAB/DAB+, access "Preferences" pressing the
key
(key F) for one second and in the StealthID tab select the DAB option.
5
For more details refer to
ii.3
Operation Modes
The information that appears on screens for each mode (Measurement mode,
Spectrum mode and TV mode) is described below. To change the mode, press
the corresponding mode key. To change the screen in the same mode, press the
same mode key consecutively.
ii.3.1
Measurement Mode
► Specific Measurements for DAB/DAB+
•MSC CBER: CBER for MSC (Main System Channel). It is part of ETI
containing audio and images.
•FIC CBER: CBER for FIC (Fast Information Channel). It is part of ETI
containing information about the configuration of the ETI itself, such as
number and type of services.
•CBER: Bit error ratio for DAB/DAB+ channel (it includes all the ETI
content).
•FIB Ratio: FIC quality ratio. It is calculated from wrong packets detected
by CRC. 100% is the top quality level.
Cursor Functions:
•Up/down: Change of main measurement on screen (only for Measurement
1/3).
•Right/left: Change of channel/frequency.
March 2025
Advanced DAB
"RF SIGNAL TUNING" on page
285
S
C
A
N
(key S).
56.
Annex ii: DAB/DAB+ OPTION
Advertisement
Need help?
Do you have a question about the PROWATCH Neo + and is the answer not in the manual?
Questions and answers