Specific mesurements for DAB/DAB+ (MSC CBER; FIC CBER; CBER; FIB Ratio)
are also saved.
For more details refer to
ii.4.9
Signal Coverage
The Signal Coverage function allows the user to check signal for a tuned signal
or a channel plan (several channels) by measuring power and other parameters
over time.
The position where all these measurements are taken is determined by a GPS
receiver. When the equipment locks a GPS signal, it automatically sets date and
time using the GPS signal. As long as the GPS is locked, date and time is updated
every hour.
All this data, measurements and GPS position can be visualized on the meter or
downloaded to a PC and exported to a file for later analysis.
Specific mesurements for DAB/DAB+ (MSC CBER; FIC CBER; CBER; FIB Ratio)
are also saved.
For more details refer to
Annex ii: DAB/DAB+ OPTION
"Signal Monitoring" on page
"Signal Coverage" on page 115.
300
107.
March 2025
Need help?
Do you have a question about the PROWATCH Neo + and is the answer not in the manual?
Questions and answers