Promax PROWATCH Neo + Manual page 156

6 The "Monitoring" option performs a monitoring task. The user must first
select the monitoring from those available for the current installation and its
duration (days, hours and minutes). If there is not any monitoring task
available the user must create one using the webControl program (for more
details refer to
7 After selecting the type of task, check the box next to it and press
to schedule the time to execute the task (see next section for details about
the timer).
8 When saving the timer for the task, the upper right corner shows an icon of
a clock
9 To change any parameter of the task, check the box next to the task and
press
10 To delete a task, check the box next to it and in
11 After setting up the tasks press
task execution starts.
12 When the task is finished, the user can access the data through "Go to file
..." option in
installation window where the data for each installation are stored.
13 Once the task is completed, user can access a short log for each
programmed task, just to know if each task has been successfully completed
Chapter 5: TOOLS
"Signal Quality Monitoring" on page
indicating that the equipment has tasks pending to execute.
Figure 99.
: Parameters.
: Tasks. It will take you directly to the management
: Exit. Since this moment the timer for
148
214).
:Timer
:Tasks, press "Delete".
March 2025