Promax PROWATCH Neo + Manual page 46

2.9 Practical examples
The next section is a general explanation of how to tune a terrestrial or satellite
RF signal, step by step. For more details about operation and setting parameters
refer to "RF SIGNAL TUNING" on page
2.9.1 RF Terrestrial signal tuning
1 Connect the RF input signal cable to the RF input connector of your
equipment.
2 Press the Preferences
3 Access the tab "Stealth ID" to use the automatic identification feature.
4 Select the type of signals you want to identify when the meter is searching
a signal. Press "Save" and "Exit".
5 Press the Settings
Terrestrial.
6 Press the Spectrum
again this key to switch among views. Select the SPECTRUM 1/3 view.
Chapter 2: SETTING UP
Figure 40.
56).
key for 1 second.
key. At "Source of signal" select RF. At "Band" select
key. The signal spectrum appears on screen. Press
38 March 2025