Advertisement
website) that can be filled and imported into the equipment (this template has
been created in an Excel file; the procedure explained below only works for the
Excel 2007 version and above).
Next are the steps to fill in the template data and import them to the equipment:
Antenna Generator
►
1
Download the "Antenna XML Generator" template from the
2
In the "Model" box enter the name by which the antenna will be identified
(maximum 8 characters).
3
In the "Description" box, type a description to identify the antenna.
4
In the "Impedance" box select the impedance of the antenna between 50
and 75 ohms.
5
In the "Height" box enter the antenna height in meters.
6
Now fill the calibration table of the antenna with the K factor according to
frequency.
7
Do not change units when filling the table.
8
Extend or contract the calibration table to the number of filled lines.
9
After filling the calibration table, go to option "Save As -> Other Formats.
10
In the window that appears, edit the file name in "File name".
Chapter 5: TOOLS
Figure 95.
144
PROMAX
website.
March 2025
Advertisement
Need help?
Do you have a question about the PROWATCH Neo + and is the answer not in the manual?
Questions and answers