Promax PROWATCH Neo + Manual page 249

11.2.1 USB Flash Drive
This connection allows the user to copy files (screenshots, channel plans,
dataloggers, DiSEqC commands and others) and export/import installations
from the equipment to the USB and vice versa.
To copy some specific data from an installation
►
1 Connect the USB stick to the USB equipment port.
2 USB icon should appear on the top right corner of the equipment. This icon
indicates that an USB stick has been detected at the port.
3 Press the Installations key
some of its data.
4 Press the key
5 Press the key
the files, only screenshots, only channel plans, only dataloggers or only
DiSEqC commands).
6 Select the files from the list to be copied on the USB memory stick, by
pressing enter or by pressing
files on the list displayed).
7 Once files are selected press
This option is enabled only if it detects that there is an USB connected to the
equipment and if any file has been selected.
8 It shows a progress bar and a message informing that files are being copied
to the USB.
9 When finish you can remove the cable with the USB stick memory directly
from the equipment and connect it to a computer to view the files copied.
10 Default files are copied to the root directory of the USB memory.
Screenshots appear with PNG extension and data with XML extension.
To export one or more complete installations
►
1 Connect the USB stick to the USB equipment port.
2 USB icon should appear on the top right corner of the equipment. This icon
indicates that an USB stick has been detected at the port.
3 Press the Installations key
March 2025
(key F) and check the installation to download
: Manage to access the data of the selected installation.
: Filter by type to select the type of list to view (list of all
: File and selecting "Mark All" (it selects all
: File and select the "Copy to USB" option.
(key F) and check the installations to export.
241 Chapter 11: CONNECTING TO EXTERNAL DEVICES