Advertisement
► Screen Description
1
Selected function (TV Parameters).
2
Source of Signal.
3
Icon bar, selected installation and current date and hour
4
Access to settings:
•Change Password: It allows you to change your password.
•Reboot Equipment: It allows you to reset your equipment after
confirmation.
•About Equipment: It gives information about your equipment: model
name, serial number, release version / webControl version.
•Logout: It exits your current session.
5
Signal settings. When clicking on a button it shows settings for the current
signal and also they can be changed.
•Terrestrial / Satellite settings (band; external power supply; power
voltage; LNB drain).
•Tuning type settings (tuning by channel/frequency; channel; channel
plan; frequency).
•Tuned signal parameters.
6
If shows if signal is locked/unlocked. If locked it shows its multiplex.
7
Selection parameters: Tuning type, channel/frequency selection and channel
plan.
8
This area allows you to select between two tabs:
*. In case you have the GPS option installed, it should appear your current geographic coordinates.
March 2025
Figure 132.
211
*
.
Chapter 10: WEBCONTROL
Advertisement
Need help?
Do you have a question about the PROWATCH Neo + and is the answer not in the manual?
Questions and answers