Promax PROWATCH Neo + Manual page 53

SCD/EN50494 (only available for satellite band)
►
It enables or disables the SCD/EN50494 function to control devices of a satellite
TV installation that supports this technology (for more details refer to
EN50494 (SatCR) Commands" on page
SCD2/EN50607 (only available for satellite band)
►
It enables or disables SCD2/EN50607 mode to control devices in a satellite TV
installation which must be compatible with this technology (for more details
refer to "SCD2 / EN50607 (JESS) Commands" on page
Polarization (only available for satellite band)
►
It allows the user to select the signal polarization between Vertical/Right
(vertical and circular clockwise) and Horizontal/Left (horizontal and circular anti-
clockwise), or disable it (OFF). In tuning by channel mode this option can not be
changed because is defined by the channel.
Sat Band (only available for satellite band)
►
It allows the user to select the High or Low band frequency for satellite channel
tuning. In channel tuning mode the Band Sat can not be changed. In tuning by
channel mode this option can not be changed because is defined by the channel.
LNB Low Osc. (only available for satellite band)
►
It defines the local oscillator frequency for the LNB low band. When a channel
plan is selected but LNB oscillator values are not properly selected, a warning is
issued.
LNB High Osc. (only available for satellite band)
►
It defines the local oscillator frequency for the LNB high band (up to 25 GHz).
When a channel plan is selected but LNB oscillator values are not properly
selected, a warning is issued.
March 2025
250).
45 Chapter 3: SETTINGS AND PREFERENCES
"SCD /
252).