Promax PROWATCH Neo + Manual page 248

11 CONNECTING TO EXTERNAL DEVICES
11.1 Introduction
The equipment can interact with external devices, sharing information through
its interfaces. Connection types are:
Input/output data via Ethernet port (IP CTRL).

Input/output data via USB port.

Video/Audio digital output via HDMI™ port.

Video/Audio analogue input via V/A port.

DiSEqC, SCD/EN50494 standard (also known as SatCR) and SCD2/

EN50607 standard (also known as JESS) interface via RF connector.
CAM modules input via Common Interface slot

TS-ASI Input/Output via BNC connector

Next is described each of these interfaces and their interaction with external
devices.
11.2 USB Port
Devices that can connect the meter via USB port are:
USB flash drive.

USB WiFi adapter

GPS signal receiver.

Keyboard (you need to connect a USB hub between the keyboard and the

equipment).
*. only available for
only available for
**.
***. only the ones approved by PROMAX
Chapter 11: CONNECTING TO EXTERNAL DEVICES
***
("dongle").
Neo
PROWATCH
Neo
PROWATCH
**
.
2
2
240
*
.
March 2025