Promax PROWATCH Neo + Manual page 138

4 During datalogger, it catches the list of available services of all channels in
the channel plan that are part of the datalogger (if this option was selected
when creating the datalogger or if the "Datalogger PSI" option is enabled in
the Preferences menu). If there is a change of channel plan during
datalogger there will be a pause (if this option was selected when creating
the datalogger). User can pause and resume the datalogger process at any
time by pressing on the key "Pause"
included when creating the datalogger, these measures will also saved.
5 At the end it saves the data and allows watching the results on screen by
channel plan/attenuation test. To change the view of channel plan or
attenuation test data press on the
attenuation will appear as the option TER ICT and SAT ICT respectively.
6 It is also possible to download Datalogger files to a PC by the NetUpdate
software (free download on the PROMAX website). Once downloaded, the
program can generate reports with these files. This is not possible with the
datalogger files exported directly to a USB (without using NetUpdate).
Information of Service lists is in the XML files downloaded to the PC.
NOTE: To make a datalogger with the Field Strength tool, in first place user has
to enable the field strength tool, and then to create a new datalogger file.
The field strength data will be stored in this datalogger.
Screen Description (Datalogger)
►
1 Selected installation; date and time.
2 Current datalogger name.
Chapter 5: TOOLS
. If the "Attenuation Test" option was
key. Data about terrestrial and satellite
Figure 86.
130 March 2025