Promax PROWATCH Neo + Manual page 32

Also, depending on the screen, the cursor has some specific functions. They are:
In MEASUREMENT mode, the cursor has these functions:
►
Left - Right

•Channel change or frequency change (according to tune selected: tune by
channel or tune by frequency).
Up - Down

•Change of main measure on screen (screen MEASUREMENT 1/3).
In TV mode, the cursor has these functions:
►
Left - Right

•Channel change or frequency change (according to tune selected: tune by
channel or tune by frequency).
Up - Down

•Change of TV service.
In SPECTRUM ANALYZER mode, the cursor has these functions:
►
Left - Right

•CH or FR: Channel change (CH) or frequency (FR) change (according to
tune selected: tune by channel or tune by frequency).
•SP: Span change.
•MK: Marker move (if marker is enabled).
Up - Down

•Reference level change.
In Spectrum Analyzer mode, pressing the Enter for 1 second, a box appears
explaining the selection modes available. From here user can also select the
joystick mode.
Chapter 2: SETTING UP
Figure 26. Channel Tuning selected
24 March 2025