Promax PROWATCH Neo + Manual page 176

3 Pilot frequencies 1 to 4 and power level of each one. These frequencies can
be selected by the user.
4 TILT value in dB/MHz and difference between pilot frequency 1 and pilot
frequency 4 in dB.
5 Graphic bar for each frequency pilot power and resulting TILT.
6 Softkeys.
•F1: Exits function.
•F3: Access other tools.
Cursor functions:
•Cursor up/down: Change of pilot frequency.
5.22 Scan
5.22.1 Description
The Scan function shows on screen the signal level in a graph bar for each one
of the channels in the channel plan.
5.22.2 Operation
The Scan function is available for all DVB-C and DVB-C2 signals.
1 Connect signal to input and check in Settings the source signal is RF and
band is terrestrial.
2 Press
3 Scan function opens.
Chapter 5: TOOLS
: Tools and select Tilt & Scan option. Then select Scan option.
168 March 2025