Promax PROWATCH Neo + Manual page 165

must be correct for the TS to be decoded. If any of these parameters fails the
information cannot be recovered and therefore the signal cannot be decoded.
5 Priority
recommended by DVB for continuous or periodic monitoring of TS and ensure
quality of transmission parameters. The alarm in any of these parameters
does not prevent the receiving but it is indicative of a possible problem.
6 Priority 3: Low level security parameters. These are parameters that are not
harmful but are required for getting the most from the receiver capabilities.
They ensure that the receiver can extract in the best conditions the TS
information especially when there are additional features such as the
program guide or the services list.
7 Signal status (searching/locked/multiplex name).
8 Softkey menus.
•Advanced
detection and updating of the TS tables.
Cursor functions:
•Cursor up/down: It moves among alarms and highlights one on blue
background.
•Enter: When you press on an alarm, it gives access to the alarm log.
Icons that appear according to the alarm type are:
OK.

Warning.

Error.

Alarm Log Screen Description
►
To access the alarm log screen, press on the alarm to access its log screen.
March 2025
2: Medium level
:It shows the "Restart Analysis" option which makes a new
security parameters.
157
These are alarms
Chapter 5: TOOLS