Promax PROWATCH Neo + Manual page 192

3
Interarrival packet time: It shows the IP packet percentage as a

function of time between packets. Its purpose is check for reception
packet continuity, for the selected stream. Usually, the graph should
concentrate around small time values. Spreading through the time axis
may point to a network problem. Maximum interval measure shows the
maximum time detected between consecutive IP packets.
Packet Rate Over Time: This graph shows the number of IP packets

being received from the current streaming over time.
4 Advanced.
For Interarrival Packet Time allows to change span (4, 8, 40, 200, 400

and 1920 ms) or restart analysis.
For Packet Rate Over Time allows change resolution (1, 5, 10, 50, 200

and 1000 ms) or restart analysis.
7.3.3 TV Mode
1 Selected installation; date and time.
2 Number of view/total views.
3 IPTV mode enabled, battery level.
4 Tuned service image.
5 Multicast IP address and name of the selected service.
Chapter 7: IPTV
Figure 119. IP TV 1/3
184 March 2025