Promax PROWATCH Neo + Manual page 218

2 Source of Signal.
3 Icon bar, selected installation and current date and hour
4 Access to settings:
•Change Password: It allows you to change your password.
•Reboot Equipment: It allows you to reset your equipment after
confirmation.
•About Equipment: It gives information about your equipment: model
name, serial number, release version / webControl version.
•Logout: It exits your current session.
5 Signal settings. When clicking on a button it shows settings for the current
signal and also they can be changed.
•Terrestrial / Satellite settings (band; external power supply; power
voltage; LNB drain).
•Tuning type settings (tuning by channel/frequency; channel; channel
plan; frequency).
•Tuned signal parameters.
6 If shows if signal is locked/unlocked. If locked it shows its multiplex.
7 Selection parameters: Tuning type, channel/frequency selection and channel
plan.
8 Signal data: Power, C/N, MER, CBER, VBER, Offset, LM
9 Spectrum graph.
10 Spectrum settings parameters: reference level, center frequency, span and
analyzer (automatic reference level) / spectrum (reference level set by user)
mode.
10.5 TV Parameters
► Description
TV Parameters screen shows important metadata that identifies the network
(NID), (ONID), TS, Service, LCN, etc. and also a slide show of one service that
belongs to the selected multiplex. To communicate you need at least 200 kB/s
of bandwidth.
To access this screen click on TV icon
*. In case you have the GPS option installed, it should appear your current geographic coordinates.
**. In case you have DAB Advanced or FM Advanced installed, it shows advanced measurements
related to these options.
Chapter 10: WEBCONTROL
.
210
*
.
**
.
March 2025