Promax PROWATCH Neo + Manual page 250

4 Press the key
5 A progress bar and a message indicates that the files are being copied to the
USB. The files are copied to the root directory of the USB in ZIP format.
6 When finished, the cable can be extracted directly with the USB stick and
connect it to a computer to display the copied files.
7 Unzip the installation file to access the data.
To import one installation
►
1 Connect the USB stick to the USB equipment port.
2 USB icon should appear on the top right corner of the equipment. This icon
indicates that an USB stick has been detected at the port.
3 Press the Installations key
4 Press de key
5 A drop-down menu shows the installations identified in the USB memory. An
installation can be imported if it has the same folder structure than when
exporting. Select the installation to import from those available.
6 The import process starts. If the name of the installation matches with an
existing one, it gives a warning before import.
11.2.2 USB WiFi adapter ("dongle")
This connection is necessary for the use of the equipment as a WiFi meter (for
more details refer to
access point and use the meter remotely with the webControl tool (for more
details refer to
11.2.3 GPS Signal Receiver
The GPS Signal Receiver is needed for the "Signal Coverage" tool. This tool takes
measurements linked to a geographic position determined by the GPS receiver.
Later on, all this data, measurements and GPS position can be downloaded to a
PC and exported to a file for later analysis (for more details refer to
Coverage" on page
Chapter 11: CONNECTING TO EXTERNAL DEVICES
: Tools and select Export to USB.
(key F).
: Tools and select Import from USB.
"WIFI MONITORING" on page
"WEBCONTROL" on page
115).
171) or to connect to a WiFi
204).
242
"Signal
March 2025