Device Management; Device Management Overview; Device Management Configuration - 3Com 8807 Configuration Manual

69

Device Management

Overview
Device Management
Configuration
Rebooting the Switch
Enabling the Timing
Reboot Function
D
EVICE MANAGEMENT
With the device management function, the switch can display the current running
state and event debugging information about the slots, thereby implementing the
maintenance and management of the state and communication of the physical
devices. In addition, there is a command available for rebooting the system, when
some function failure occurs.
The main device management tasks are to check the status of the modules, CPU,
and the memory usage of the switch.
The following sections describe the configuration tasks for device management:
"Rebooting the Switch"
■
"Enabling the Timing Reboot Function"
■
"Specifying the Bootstrap Programs for the Switch"
■
"Upgrading BootROM"
■
"Setting Slot Temperature Limit"
■
"Updating Service Processing Modules"
■
It would be necessary for users to reboot the switch when failure occurs.
Perform the following configuration in user view.
Table 744 Reboot the switch
Operation
Root the switch
After you enable the timing reboot function on the switch, the switch will be
rebooted on the specified time.
Perform the following configuration in user view, and display schedule reboot
command can be performed in any view.
Table 745 Enable the Timing Reboot Function
Operation
Enable the timing reboot function of the
switch, and set specified time and date
Enable the timing reboot function of the
switch, and set waiting time
Command
reboot [ slot slot-no ]
Command
schedule reboot at hh:mm [ yyyy/mm/dd ]
schedule reboot delay { hhh:mm | mmm }