Ha Configuration Example - 3Com 8807 Configuration Manual

670 C 54: HA C
HAPTER
HA Configuration
Example
ONFIGURATION
Network requirements
Take the master module out and make the slave module take over the work of the
master to ensure the normal operation.
Configuration procedure
# Synchronize the configuration file manually.
<SW8800>slave update configuration
# Display the switchover state.
<SW8800>display switchover state
# Start the master-slave switchover manually after you confirm and press <Enter>.
<SW8800>slave switchover
Caution!!! Confirm to switch slave to master[Y/N]?y