3Com 8807 Configuration Manual page 66

66 C 9: I
HAPTER SOLATE
Configuring an
isolate-user-VLAN
Configuring a Secondary
VLAN
Mapping an
isolate-user-vlan to
Secondary VLANs
- -VLAN C
USER ONFIGURATION
Table 48 Configure an isolate-user-VLAN
Operation
Enter system view
Create a VLAN
Configure the VLAN as an
isolate-user-VLAN
Add ports to the
isolate-user-VLAN
Table 49 Configure a Secondary VLAN
Operation
Enter system view
Create a VLAN as a Secondary
VLAN
Add ports to the Secondary
VLAN
n
An isolate-user-VLAN can correspond to up to 64 Secondary VLANs.
■
You can configure up to 32 isolate-user-VLANs for a system.
■
You can configure up to 1,024 Secondary VLANs for a system.
■
You cannot configure the same MAC address in a Secondary VLAN
■
corresponding to an isolate-user-VLAN.
If a VLAN is an isolate-user-VLAN or a Secondary VLAN, you cannot configure
■
vlan-interface; a VLAN configured with vlan-interface cannot be configured as
an isolate-user-VLAN or a Secondary VLAN.
Table 50 Map an isolate-user-VLAN to secondary VLANs
Operation
Enter system view
Map an isolate-user-VLAN to
secondary VLANs
Command
system-view
vlan vlan-id
isolate-user-vlan enable
port interface-list
Command
system-view
vlan vlan-id
port interface-list
Command
system-view
isolate-user-vlan
isolate-user-vlan-num secondary
secondary-vlan-numlist
Description
-
Required
Required
You cannot configure VLAN 1
as an isolate-user-VLAN
Optional
An isolate-user-VLAN can
contain multiple ports,
including upstream ports
connecting to other switches.
However the contained ports
can only be access or hybrid
ports, not trunk ports.
Description
-
Required
You cannot configure VLAN 1
as a Secondary VLAN.
Optional
You can add multiple ports
(not uplink ports) to a
Secondary VLAN.
Description
-
Required