3Com 8807 Configuration Manual page 816

816 C 71: I
HAPTER NFORMATION
C
ENTER
Table 765 Send the configuration information to the loghost
Device Configuration
Refer to configuration
Loghost cases for related log host
configuration
2 Sending the configuration information to the console terminal
Table 766 Send the configuration information to the console terminal.
Device Configuration
Enable information center
Set the information
output direction to the
Console
Switch
Set information source
Enable terminal display
function
3 Sending the configuration information to the monitor terminal
Default value
-
Default value
By default, information
center is enabled.
-
-
-
Configuration
description
-
Configuration
description
Other configurations are
valid only if the
information center is
enabled
-
You can define which
modules and information
to be sent out and the
time-stamp format of
information, and so on.
You must turn on the
switch of the
corresponding module
before defining output
debugging information
You can view debugging
information after enabling
terminal display function