3Com 8807 Configuration Manual page 874

874 C 78: P
HAPTER ASSWORD
System Logging
Function
Password Control
Configuration Example
C C
ONTROL ONFIGURATION
Table 826 Configuring the timeout time for password authentication
Operation
Enter system view
Configure password timeout
time
The system can automatically log related information in case of the following
events:
When a user logs in successfully, the system will log the user name, IP address,
■
and VTY number
When a user is prohibited by the ACL rule, the system will log the user's IP
■
address
When a user fails in authentication, the system will log the user name, IP
■
address, VTY number, and failure cause
When a user changes his or her password that has expired, the system will log
■
the password change event
The administrator can query the login information of users based on these log
records.
Network requirements
A PC is connected with an Switch 8800 Family switch. You can either use the
default configuration or configure the password control parameters as required.
Network diagram
Figure 204 Network diagram for password control configuration
PC PC
Configuration procedure
# Configure the system login password:
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] local-user test
[3Com-luser-test] password
Password:**********
confirm:**********
Updating the password file, please wait ...
# Change the system login password to 0123456789:
[3Com-luser-test] password
Password:**********
Command
system-view
password-control
authentication-timeout
authentication-timeout
console console console console console console
LSW LSW
Switch Switch Switch Switch Switch Switch
Description
-
The value range of password
authentication timeout time is
30 to 120 seconds, and the
default value is 60 seconds