3Com 8807 Configuration Manual page 351

8800 series
Hide thumbs Also See for 8807:
Table of Contents

Advertisement

Table 325 Set the CSNP packet broadcast interval
Operation
Set the CSNP packet broadcast interval
Restore the default CSNP packet broadcast
interval on the interface
If the level is not specified, it defaults to setting CSNP packet broadcast interval for
Level-1.
By default, the CSNP packet is transmitted via interface every 10 seconds.
Setting LSP packet generation interval
As specified in the IS-IS protocol, when an event takes place, the related LSP
packet should be generated again. If LSP packets are generated frequently, a large
amount of resources will be occupied and the route's efficiency will be affected.
The exponent digression method can improve the efficiency to a certain degree.
The LSP packet generation interval can you be configured as per the actual
requirement.
Perform the following configuration in IS-IS view.
Table 326 Set LSP packet generation interval
Operation
Set LSP packet generation interval
Restore the default value of LSP packet
generation interval
Setting the LSP packet transmission interval
LSP carries the link state records for propagation throughout the area.
Perform the following configuration in interface view.
Table 327 Set the LSP packet transmission interval
Operation
Set LSP packet interval on the interface.
Restore the default LSP packet interval on the interface
By default, the LSP packet is transmitted via the interface every 33 milliseconds.
Setting LSP packet retransmission interval
Over a p2p link, if the local end does not receive the response within a period of
time after it sends an LSP packet, it considers that the originally transmitted LSP
packet has been lost or dropped. In order to guarantee the transmission reliability,
the local router will retransmit the original LSP packet.
Perform the following configuration in interface view.
Configuring Integrated IS-IS
Command
isis timer csnp seconds [ level-1 | level-2 ]
undo isis timer csnp [ level-1 | level-2 ]
Command
timer lsp-generation x y z [ level-1 | level-2 ]
undo timer lsp-generation x y z [ level-1 |
level-2 ]
Command
isis timer lsp time
undo isis timer lsp
351

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8807 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

88108814

Table of Contents