3Com 8807 Configuration Manual page 498

498 C 46: MBGP M
HAPTER
E C
ULTICAST XTENSION ONFIGURATION
Configuring the local address as the next hop when advertising routes
This involves removing the next hop configuration in the routing information
advertised to a peer (group) and configuring the local address as the next hop
address. It is valid only for IBGP peers/peer groups.
Please perform the following configurations in IPV4 multicast sub-address family
view.
Table 489 Configure the local address as the next hop when advertising routes
Operation
Configure the local address as the next hop
when advertising routing information
Remove the above configuration
Specifying the routing policy for a peer (group)
Please perform the following configurations in IPV4 multicast sub-address family
view.
Table 490 Specify the routing policy for a peer (group)
Operation
Configure routing policy for incoming packets
Remove incoming policy configuration
Configure routing policy for outgoing packets
Remove outgoing policy configuration
By default, no routing policy is specified for any peer (group).
Configuring IP-ACL-based route filtering policy for a peer (group)
Please perform the following configurations in IPV4 multicast sub-address family
view.
Table 491 Configure IP-ACL-based route filtering policy for a peer (group)
Operation
Configure filtering policy for incoming packets
Remove incoming policy configuration
Configure routing policy for outgoing packets
Remove outgoing policy configuration
By default, a peer (group) does not perform route filtering based on the IP ACL.
Configuring AS-path-list-based route filtering policy for a peer (group)
Please perform the following configurations in IPV4 multicast sub-address family
view.
Command
peer group-name next-hop-local
undo peer group-name next-hop-local
Command
peer { group-name | peer-address }
route-policy policy-name import
undo peer { group-name | peer-address }
route-policy policy-name import
peer group-name route-policy policy-name
export
undo peer group-name route-policy
policy-name export
Command
peer { group-name | peer-address }
filter-policy acl-number import
undo peer { group-name | peer-address }
filter-policy acl-number import
peer group-name filter-policy acl-number
export
undo peer group-name filter-policy
acl-number export