Netstream Configuration Examples - 3Com 8807 Configuration Manual

716 C 59: N
HAPTER ETSTREAM
Netstream
Configuration
Examples
C
ONFIGURATION
aggregation log. The eleven aggregation modes are independent of each other, so
they can be configured at the same time.
n
The configuration in system view affects version 5 UDP packets. Additionally,
■
this configuration is also effective for version 8 UDP packets when the source
port and destination address arguments are not configured in aggregation
view.
The configuration in aggregation view affects version 8 UDP packets only.
■
c
CAUTION: When the aging time is configured, the active aging time is in minutes
and the inactive aging time is in seconds.
Network requirements
As shown in Figure 169, Netstream is configured on Switch A to perform statistics
on the packets received on GigabitEthernet3/1/3. The NMM Application Module
to implement the Netstream function is plugged in slot 5 of the switch.
Network diagram
Figure 169 Diagram for 3Com Switch 8800 Family Netstream Configuration
Switch A Switch A Switch A Switch A Switch A Switch A
GE3/1/3 GE3/1/3 GE3/1/3 GE3/1/3 GE3/1/3 GE3/1/3
Network Network Network Network Network Network Network Network Network Network Network Network Network Network Network Network Network Network Network Network
Configuration procedure
# Configure the VLAN of GigabitEthernet3/1/2.
<Switch_A>system-view
[Switch_A] vlan 2
[Switch_A-vlan2] port GigabitEthernet3/1/2
[Switch_A-vlan2] quit
# Configure the IP address for the VLAN interface.
[Switch_A] interface vlan-interface 2
[Switch_A-vlan-interface2] ip address 12.110.2.1 24
[Switch_A-vlan-interface2] quit
GE3/1/2 GE3/1/2 GE3/1/2 GE3/1/2 GE3/1/2 GE3/1/2
Network
Data Collector
12.110.2.2 12.110.2.2 12.110.2.2 12.110.2.2