3Com 8807 Configuration Manual page 776

776 C 67: SSH T
HAPTER ERMINAL
S
ERVICE
Entering the public key edit view
After entering the public key view by the rsa peer-public-key command, you can
use the public-key-code begin command to enter the public key edit view and
input the public key of the client.
When inputting the public key, you may type spaces between the characters (the
system will delete the spaces automatically), or press <Enter> and then continue
to input the key. Note that the public key must be a hexadecimal string coded in
the public key format.
Perform the following configuration in public key view.
Table 722 Enter the public key edit view
Operation
Enter the public key edit view
Exiting the public key edit view
Use this configuration task to return from the public key edit view to the public
key view and save the input public key. Before saving the input public key, the
system will check the validity of the key:
If the public key string contains any illegal character, the configured key is
■
invalid;
If the configured key is valid, it will be saved to the public keys in the system.
■
Perform the following configuration in public key edit view.
Table 723 Exit the public key edit view
Operation
Exit the public key edit view
Specifying the public key for an SSH user
Use this configuration task to specify an existing public key for an SSH user.
Perform the following configuration in system view.
Table 724 Specify the public key for an SSH user
Operation
Specify the public key for an SSH user
Cancel the corresponding relationship
between the user and the public key
Configuring the server compatibility mode
Use this configuration task to set whether the server should be compatible with
the SSH 1.x client.
Perform the following configuration in system view.
Command
public-key-code begin
Command
public-key-code end
Command
ssh user username assign rsa-key keyname
undo ssh user username assign rsa-key