Device Management; Introduction To Device Management; Device Management Configuration - 3Com 4200G 12-Port Configuration Manual

44
Introduction to Device
Management

Device Management

Configuration
Restarting the Ethernet
Switch
Schedule a Reboot on
the Switch
D M
EVICE ANAGEMENT
The device management function of the Ethernet switch can report the current status
and event-debugging information of the boards to you. Through this function, you
can maintain and manage your physical device, and restart the system when some
functions of the system are abnormal.
The following sections describe the configuration tasks for device management:
Restarting the Ethernet Switch
■
Schedule a Reboot on the Switch
■
Specifying the APP to be Adopted at Reboot
■
Updating the BootROM
■
You can perform the following operation when the switch is in trouble or needs to be
restarted.
Perform the following configuration in user view:
Table 324 Restart the Ethernet switch
Operation Command
Restart the Ethernet reboot [ unit unit-id ]
switch
When rebooting, the system checks whether there is any configuration change. If
there is, it prompts you to indicate whether or not to proceed. This prevents you from
losing your original configuration due to oblivion after system reboot.
After you schedule a reboot on the switch, the switch will reboot at the specified
time.
Table 325 Schedule a reboot on the switch
Operation Command
Schedule a reboot on schedule reboot at hh:mm [ mm/dd/yyyy
the switch, and set the | yyyy/mm/dd ]
reboot date and time
Schedule a reboot on schedule reboot delay { hhh:mm |
the switch, and set the mmm }
reboot waiting delay
Display information display schedule reboot
about scheduled reboot
on the switch
There is at most one minute defer for scheduled reboot, that is, the switch will reboot
within one minute after reaching the specified reboot date and time.
Description
—
Description
—
—
You can execute the
display command in any
view