3Com 8807 Configuration Manual page 396

396 C 34: IP R
HAPTER OUTING
n
P C
OLICY ONFIGURATION
Table 394 Define if-match conditions
Operation
Match the AS path domain of
the BGP routing information
Disable matching the AS path
domain of the BGP routing
information
Match the community attribute
of the BGP routing information
Disable matching the
community attribute of the BGP
routing information
Match the destination address
of the routing information
Disable matching the
destination address of the
routing information
Match the next-hop interface of
the routing information
Disable matching the next-hop
interface of the routing
information
Match the next-hop of the
routing information
Disable matching the next-hop
of the routing information set
by ACL
Disable matching the next-hop
of the routing information set
by address prefix list
Match the routing cost of the
routing information
Disable matching the routing
cost of the routing information
Match the tag domain of the
OSPF routing information
Cancel the tag domain of the
matched OSPF routing
information
For the details about the if-match mpls-label and if-match vpn-target
commands, refer to the 08-MPLS command module in the 3Com Switch 8800
Family Series Routing Switches Command Manual.
By default, no matching will be performed.
Note the following:
The if-match clauses for a node in the route-policy have the relationship of
"AND" for matching. That is, the route must satisfy all the clauses to match the
node before the actions specified by the apply clauses can be executed.
If no if-match clauses are specified, all the routes will pass the filtering on the
node.
Command
if-match as-path acl-number
undo if-match as-path
if-match community { basic-community-number [
whole-match ] | adv-community-number }
undo if-match community
if-match { acl acl-number | ip-prefix ip-prefix-name }
undo if-match { acl | ip-prefix }
if-match interface interface-type interface-number
undo if-match interface
if-match ip next-hop { acl acl-number | ip-prefix
ip-prefix-name }
undo if-match ip next-hop
undo if-match ip next-hop ip-prefix
if-match cost value
undo if-match cost
if-match tag value
undo if-match tag