3Com 8807 Configuration Manual page 775

8800 series
Hide thumbs Also See for 8807:
Table of Contents

Advertisement

By default, the system does not update the server key.
Configuring the authentication timeout
Use this configuration task to set the authentication timeout of SSH connections.
Perform the following configuration in system view.
Table 719 Set the SSH authentication timeout
Operation
Set the SSH authentication timeout
Restore the default SSH authentication timeout
By default, the authentication timeout is 60 seconds.
Configuring the number of authentication retries
Use this configuration task to set the number of authentication retries an SSH user
can request for a connection, thereby preventing illegal behaviors such as
malicious guessing.
Perform the following configuration in system view.
Table 720 Configure the number of SSH authentication retries
Operation
Configure the number of SSH authentication
retries
Restore the default number of SSH
authentication retries
By default, the number of authentication retries is 3.
Entering the public key view
Use this configuration command to enter the public key view and specify the
name of the public key of the client.
Perform the first configuration in the following table in system view.
Table 721 Public key configuration
Operation
Enter the public key view
Exit the public view and return to the system view
n
The configuration commands are applicable to the environments where the server
employs RSA authentication and password-publickey authentication on SSH
users. If the server adopts password authentication on SSH users, these
configurations are not necessary.
SSH Terminal Service
Command
ssh server timeout seconds
undo ssh server timeout
Command
ssh server authentication-retries times
undo ssh server authentication-retries
Command
rsa peer-public-key key-name
peer-public-key end
775

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

88108814

Table of Contents