# Map the packets received on GigabitEthernet3/1/3 to slot 5.
[Switch_A] mirror-group 1 inbound GigabitEthernet3/1/3 mirror-to slo
t 5
# Enable the Netstream function on the module of slot 5.
[Switch_A] ip Netstream enable slot 5
# Configure the export source address of the Netstream statistics packets.
[Switch_A] ip Netstream export source 12.110.2.10
# Configure the export destination address and destination port number of the
Netstream statistics packets.
[Switch_A] ip Netstream export host 12.110.2.2 9991
Notes:
The Network Data Collector may require SNMP read access to the Switch 8800.
■
The Network Data Collector may require that the Switch 8800 have its time
■
synchronized with the NDC.
The Network Data Collecgtor may use a different default UDP port than shown
■
in the example.
Netstream Configuration Examples
717