Displaying And Maintaining Nqa - 3Com 8807 Configuration Manual

Displaying and
Maintaining NQA
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] nqa administrator icmp
# Configure the test type as icmp.
[SW8800-nqa-administrator-icmp] test-type icmp
# Configure the destination IP to 192.168.80.80.
[SW8800-nqa-administrator-icmp] destination-ip 192.168.80.80
# Configure the test times to 5.
[SW8800-nqa-administrator-icmp] count 5
4 Execute the test
# Execute one test.
[SW8800-nqa-administrator-icmp] test-enable
5 Display the test results
# Display the results of this test in this test group.
nqa
<SW8800> display
nqa
entry(admin administrator, tag icmp) test results:
Destination ip address:192.168.80.80
Vpn-instance: NULL
Send operation times: 5
Min/Max/Average Round Trip Time: 21/33/25
Square-Sum of Round Trip Time: 3557
Last complete test time: 2005-12-8 11:22:33.4
Extended result:
Packet lost in test: 0%
Disconnect operation number:0
System busy operation number:0
Operation sequence errors:0
Other operation errors:0
Use the display command to display the operation status after the above
configurations. Verify the configuration effect through the displayed information.
Table 819 Display and maintain NQA
Operation
Display the configuration information
Display the test results
results administrator icmp
Command
display current-configuration or display
this in NQA test group view
display nqa { results | history } [
administrator-name test-tag ]

Displaying and Maintaining NQA

Receive response times: 5
Operation timeout number:0
Connection fail number:0
Drop operation number:0
865