Displaying And Debugging Integrated Is-Is - 3Com 8807 Configuration Manual

358 C 32: I
HAPTER NTEGRATED
Resetting the Specified
IS-IS Peer
Displaying and
Debugging Integrated
IS-IS
IS-IS C
ONFIGURATION
Table 343 Reset all the IS-IS data structures
Operation
Reset the IS-IS data structure
By default, the IS-IS data structure is not cleared.
When it is necessary to connect a specified peer again, perform the following
configuration in user view.
Table 344 Reset the specified IS-IS peer
Operation
Reset the specified IS-IS peer
By default, the IS-IS peer is not cleared.
After completing the above configuration, execute the display command in any
view to display the running state of the IS-IS configuration, and to verify the effect
of the configuration. Execute the debugging command in user view to debug the
IS-IS module.
Through the following configuration operations, you can view the LSDB of the
IS-IS, the transmitting/receiving of various packets of the IS-IS and the SPF
calculation so as to determine the IS-IS route maintenance conditions.
Table 345 Display and debug IS-IS
Operation
Display IS-IS LSDB
Display IS-IS SPF calculation
log
Display IS-IS routing
information
Display IS-IS neighbor
information
Display mesh group
information
Enable IS-IS debugging
Disable IS-IS debugging
Command
reset isis all
Command
reset isis peer system-id
Command
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] | [ [ LSPID | local ]
| verbose ]* ]*
display isis spf-log
display isis route
display isis peer [ verbose ]
display isis mesh-group
debugging isis { adjacency | all | authentication-error |
checksum-error | circuit-information | configuration-error |
datalink-receiving-packet | datalink-sending-packet |
general-error | interface-information | memory-allocating |
receiving-packet-content | restart-events |
self-originate-update | sending-packet-content |
snp-packet | spf-event | spf-summary | spf-timer |
task-error | timer | update-packet }
undo debugging isis { adjacency | all | authentication-error
| checksum-error | circuit-information | configuration-error
| datalink-receiving-packet | datalink-sending-packet |
general-error | interface-information | memory-allocating |
receiving-packet-content | restart-events |
self-originate-update | sending-packet-content |
snp-packet | spf-event | spf-summary | spf-timer |
task-error | timer | update-packet }