3Com 8807 Configuration Manual page 785

n
SFTP Configuration
Example
Table 738 SFTP file operations
Operation
Change the name of the specified file on the
server
Download a file from the remote server
Upload a local file to the remote server
Display the list of files in the specified
directory
Delete a file from the server
The dir command and the ls command have the same functionality.
■
The delete command and the remove command have the same functionality.
■
Displaying help information
Use this command to display command-relevant help information such as the
format of the command, parameter configurations, and so on.
Perform the following configuration in SFTP client view.
Table 739 Display help information for client commands
Operation
Display help information for client commands help [ command-name ]
Network requirements
As shown in Figure 184:
Switch A is used as the SFTP server, and its IP address is 10.111.27.91;
■
Switch B is used as the SFTP client;
■
An SFTP user is configured with the username "8040" and password "3com".
■
Network diagram
Figure 184 Network diagram for SFTP
Switch B Switch B
SFTP server
IP address IP address
10.111.27.91
PC PC
Command
rename old-name new-name
get remote-file [ local-file ]
put local-file [ remote-file ]
dir [ remote-path ]
ls [ remote-path ]
delete remote-file
remove remote-file
Command
Switch A Switch A
SFTP client
SFTP Service 785