Card Intermixing For Mpls Support; Overview - 3Com 8807 Configuration Manual

8800 series
Hide thumbs Also See for 8807:
Table of Contents

Advertisement

50

Overview

Introduction to Card
Intermixing
Card Intermixing
Mechanism
C
I
ARD
S
UPPORT
The intermixing feature is used to enable deployment of MPLS VPN services on
cards that do not support MPLS. Switch 8800 Family routing switches support
various modes of MPLS VPN function and provide abundant and differentiated
MPLS VPN service to meet the differentiated needs of different users in the
performance, reliability, port utilization of MPLS VPN functions.
n
Unless otherwise specified, MPLS VPN services are processed by the
MPLS-supporting interface cards. In this manual, an interface card that
supports MPLS function is called MPLS card for short, and an interface card
that does not support MPLS function is called non-MPLS card for short.
The purpose of card intermixing is to enable the non-MPLS cards to support
MPLS function through the MPLS cards. Refer to the "VPN" section in this
manual for the information on the processing of MPLS VPN through VPLS
Application Modules.
Card intermixing does not support using XP4B and other interface cards on
which ACL redirection is configured under the port group as non-MPLS card for
intermixing.
The implementation mechanism for card intermixing is as follows:
The MPLS card and the non-MPLS card co-exist in the same switch;
Use the port of the non-MPLS card for the access to the service private network
side of the MPLS VPN ;
Redirect the port of the non-MPLS card through QACL, to redirect the received
packets to the specified MPLS card for processing;
The port of MPLS card is set as Loopback port automatically and the port type
is Trunk;
The access port of the non-MPLS card and the Loopback port of the MPLS card
belong to the same VLAN.
The port on the MPLS card can also be used for the access to the service private
network side of the MPLS VPN. In this case, you do not need to configure card
intermixing, and you must use the port of the MPLS card for the connection with
the MPLS public network side.
NTERMIXING FOR
MPLS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

88108814

Table of Contents