Ndp Configuration Example - 3Com 8807 Configuration Manual

8800 series
Hide thumbs Also See for 8807:
Table of Contents

Advertisement

Configuring the interval
at which NDP packets
are sent
Displaying and
debugging NDP
NDP Configuration
Example
Table 666 Configure the aging timer for NDP information
Operation
Configure the aging timer for
NDP information
The NDP information of the adjacent device must be updated periodically to
ensure that the switch can update the local NDP neighbor information table in
time after the configuration of the adjacent device is changed. You can configure
the interval at which NDP packets are sent by using the following command.
Table 667 Configure the interval at which NDP packets are sent
Operation
Enter system view
Configure the interval at
which NDP packets are sent
After the above-mentioned configuration:
Use the display command in any view to display the operating state of the
NDP and verify configuration result.
You can use the reset command to clear the statistics related to NDP in user
view.
Table 668 Display and debug NDP
Operation
Display the NDP configuration of the system
(including the interval at which packets are
sent and the aging timer for NDP information
Display the NDP neighbor information of the
specified port
Clear the statistics of an NDP-enabled port
Network requirements
Switch A, Switch B, and Switch C are interconnected.
Ethernet1/1/1 on Switch A is connected to Ethernet 1/1/1 on Switch B and
Ethernet 1/1/2 on Switch A is connected to Ethernet 1/1/1 on Switch C.

NDP Configuration Example

Command
ndp timer aging
aging-in-secs
Command
system-view
ndp timer hello seconds
Command
display ndp
display ndp interface port-list
reset ndp statistics [ interface port-list ]
721
Description
By default, the aging timer for
NDP information is 180
seconds.
The aging timer for NDP
information must be greater
than or equal to the interval at
which NDP packets are sent;
otherwise, the NDP
information table will be
unstable.
Description
-
By default, NDP packets are
sent every 60 seconds.
The interval at which NDP
packets are sent must be less
than or equal to the aging
timer for NDP information.
Otherwise, the NDP
information table will be
unstable.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8807 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

88108814

Table of Contents