Displaying And Debugging Device Management; Device Management Configuration Example - 3Com 8807 Configuration Manual

796 C 69: D
HAPTER EVICE MANAGEMENT
Displaying and
Debugging Device
Management
Device Management
Configuration
Example
Using the Switch as an
FTP Client to Implement
the Remote Upgrade
(Switch 8807)
Table 750 Update service processing modules
Operation
Download the host software of service
processing module to the system memory
c
CAUTION:
When you use the update l3plus command to update service processing
■
modules, you must use the switch host APP file which includes the load
program of L3PLUS service processing modules.
The maximum size of L3PLUS update file loaded by the update l3plus
■
command is 24 M.
After the above configuration, execute display command in any view to display
the running of the device management configuration, and to verify the effect of
the configuration.
Table 751 Display and Debug device management
Operation
Display the module types and running states
of each card.
Display the application deployed on next
startup
Display the running state of the built-in fans.
Display the Used status of switch memory
Display the state of the power.
Display CPU occupancy
Network requirements
The user logs into the switch using Telnet, downloads the application from the FTP
server to the flash memory of the switch, and implements remote upgrade using
the right commands.
The switch serves as an FTP client and the remote PC as an FTP server. The
configuration on the FTP server is as follows: an FTP user is configured with the
name switch, the password hello and the read & write authority over the Switch
root directory on the PC. The IP address of a VLAN interface on the switch is
1.1.1.1, and the IP address of the PC is 2.2.2.2. The switch and PC are reachable
with each other.
The switch applications switch.app and boot.app are stored on the PC. Using FTP,
these files can be downloaded from the remote FTP server to the switch.
Command
update l3plus slot slot-no filename
file-name ftpserver server-name username
user-name password password [ port
port-num ]
Command
display device [ detail | [ shelf shelf-no ] [
frame frame-no ] [ slot slot-no ] ]
display boot-loader
display fan [ fan-id ]
display memory [ slot slot-no ]
display power [ power-ID ]
display cpu [slot slot-no ]