Introduction To Integrated Is-Is - 3Com 8807 Configuration Manual

8800 series
Hide thumbs Also See for 8807:
Table of Contents

Advertisement

32
Introduction to
Integrated IS-IS
Terms of IS-IS Routing
Protocol
I
NTEGRATED
Intermediate System-to-Intermediate System (IS-IS) intra-domain routing
information exchange protocol is designed by the international organization for
standardization (ISO) for connection-less network protocol (CLNP). This protocol is
a dynamic routing protocol. To let this protocol support IP routing, IETF expands
and modifies IS-IS in RFC1195, applying the protocol to TCP/IP and OSI. The
modified IS-IS is called Integrated IS-IS or Dual IS-IS.
IS-IS is a link state protocol, which uses shortest path first (SPF) algorithm. IS-IS and
the OSPF protocol are similar in many aspects. As an interior gateway protocol
(IGP), IS-IS is applied inside an AS.
Terms of IS-IS routing protocol
Intermediate System (IS). IS equals a router of TCP/IP. It is the basic unit in IS-IS
protocol used for propagating routing information and generating routes. In
the following text, the IS shares the same meaning with the router.
End System (ES). It equals the host system of TCP/IP. ES does not process the
IS-IS routing protocol, and therefore it can be ignored in the IS-IS protocol.
Routing Domain (RD). A group of ISs exchange routing information with the
same routing protocol in a routing domain.
Area. Area is the division unit in the routing domain.
Link State DataBase (LSDB). All the link states in the network form the LSDB. In
an IS, at least one LSDB is available. The IS uses the SPF algorithm and the LSDB
to generate its own routes.
Link State Protocol Data Unit (LSPDU). In the IS-IS, each IS will generate an LSP
which contains all the link state information of the IS. Each IS collects all the
LSPs in the local area to generate its own LSDB.
Network Protocol Data Unit (NPDU). It is the network layer packets of OSI and
equals the IP packet of TCP/IP.
Designated IS (DIS). It is the elected router on the broadcast network.
Network Service Access Point (NSAP) is the network layer address of OSI. It
identifies an abstract network service access point and describes the very
network address structure for the OSI model.
Link types IS-IS routing protocol is applied to
IS-IS routing protocol can run on point to point Links, such as PPP, HDLC and
others. IS-IS routing protocol can also run on broadcast links, such as Ethernet,
Token-Ring and others.
IS-IS C
ONFIGURATION

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

88108814

Table of Contents