3Com 8807 Configuration Manual page 676

676 C 55: ARP C
HAPTER ONFIGURATION
Execute the reset command in user view to clear ARP mapping table. Execute the
debugging command in user view to debug ARP configuration.
Table 614 Display and debug ARP
Operation
Display ARP mapping table
Display the current setting of the
dynamic ARP aging timer
Display multicast ARP
configuration information
Display ARP proxy information
Reset ARP mapping table
Enable ARP information
debugging
Disable ARP information
debugging
Command
display arp [ ip-address | [ dynamic | static ] [ | { begin |
include | exclude } text ] ]
display arp timer aging
display arp multi-port [ ip-address ]
display arp proxy [ vlan vlan-id]
reset arp [ dynamic | static | interface { interface-type
interface-number } | all ]
debugging arp { error | info | packet }
undo debugging arp { error | info | packet }