3Com 8807 Configuration Manual page 791

Setting the Prompt
Mode of the File System
Considering that when dismounting the CF card you may be performing the write
operation on it, the switch provides the umount command which can stop the CF
card to ensure the safety and consistency of the file operations on it, that is, you
must execute the umount command to stop the CF card before dismounting it.
The system saves logs in the CF card. The log file is saved in the root directory with
the name logfileX.txt, where the X is an integral number ranging from 1 to 5.
The log file is recorded in the CF card in text format. You can use the more
command to display the log file on the switch.
Note that:
Before dismounting the CF card, you must use the umount command first to
■
avoid the data lost in the buffer.
After using the umount command, you can dismount the CF card from the
■
slot. When inserted, the CF card is enabled automatically.
When the light of the CF card is in the constant bright state, there may be no
■
write or read operation. But you are recommended not to hot insert/dismount
the CF card for data may still exist in the buffer.
Perform the following configuration in user view.
Table 742 Storage device operation
Operation
Format the storage device
Restore the space of the storage device
Delete the CF card
The following command can be used for setting the prompt mode of the current
file system.
Perform the following configuration in system view.
Table 743 File system operation
Operation
Set the file system prompt mode.
File System Configuration
Command
format filesystem
fixdisk device
umount device
Command
file prompt { alert | quiet }
791