3Com 8807 Configuration Manual page 551

Displaying IP routing table associated with VPN-instance
After the above configuration, you can execute display command in any view to
display the corresponding information in the IP routing tables related to
VPN-instance, and to verify the effect of the configuration.
Table 554 Display IP routing table associated with VPN-instance
Operation
Display IP routing table
associated with VPN-instance
Displaying VPN-instance related information
After the above configuration, executing the display command in any view can
display the VPN-instance related information, including its RD, description, the
interfaces associated with it, and so on. You can view the information to verify the
configuration effect.
Table 555 Display VPN-instance related information
Operation
Display the VPN-instance related information,
including its RD, description, the interfaces
associated with it, and so on.
Debugging information concerning processing BGP
Execute debugging command in user view for the debugging of the related
vpn-instance information.
Table 556 Enable the debugging for processing BGP
Operation
Enable the debugging for
processing BGP
Disable the debugging
Displaying MPLS L3VPN-LSP information
Table 557 Display MPLS L3VPN-LSP information
Operation
Display MPLS L3VPN LSP
information
Display MPLS L3VPN LSP
VPN-instance information
Displaying Sham-link
Table 558 Display Sham-link
Operation
Display Sham-link
Displaying and Debugging BGP/MPLS VPN
Command
display ip routing-table vpn-instance vpn-instance-name [
[ip-address ] [ verbose ] | statistics ]
Command
display ip vpn-instance [ vpn-instance-name
| verbose ]
Command
debugging bgp { all | event | normal | { keepalive |
mp-update | open | packet | update | route-refresh | update
} [ receive | send |] [ verbose ] }
undo debugging bgp { {all | event | normal | keepalive |
mp-update | open | packet | update | route-refresh } [
receive | send | verbose ] } { all | event | normal | update }
Command
display mpls l3vpn-lsp [ verbose] include text
display mpls l3vpn-lsp [ vpn-instance vpn-instance-name ] [
transit | egress | ingress ] [include text | verbose ]
Command
display ospf [ process-id ] sham-link
551