3Com 8807 Configuration Manual page 805

FTP Server Configuration
Example
Configuration procedure
1 Configure FTP server parameters on the PC: a user named as switch, password
hello, read and write authority over the Switch directory on the PC.
2 Configure the switch
# Log into the switch through the Console port locally or Telnet remotely.
Then type in the right command in user view to establish FTP connection, then
correct username and password to log into the FTP server.
<SW8800> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
c
CAUTION: If the Flash Memory of the switch is not enough, you need to first
delete the existing programs in the Flash Memory and then upload the new ones.
# Enter the authorized directory of the FTP server.
[ftp] cd switch
# Use the put command to upload the vrpcfg.cfg to the FTP server.
[ftp] put vrpcfg.cfg
# Use the get command to download the switch.app from the FTP server to the
Flash directory on the FTP server.
[ftp] get switch.app
# Use the quit command to release FTP connection and return to user view.
[ftp] quit
<SW8800>
# Use the boot boot-loader command to specify the downloaded program as
the application at the next login and reboot the switch.
<SW8800> boot boot-loader switch.app
<SW8800> reboot
Network requirements
Switch serves as FTP server and the remote PC as FTP client. The configuration on
FTP server: Configure an FTP user named as switch, with password hello and with
read & write authority over the flash root directory on the PC. The IP address of a
VLAN interface on the switch is 1.1.1.1, and that of the PC is 2.2.2.2. The switch
and PC are reachable.
FTP Configuration 805